How to inserting the batteries 1.Open the battery compartment cover by pushing the latch back and removing the cover completely. 2.Insert 3 x AAA batteries into the battery compartment according to the polarity indicators inside the compartment. 3.Close the battery compartment cover by placing the 2 small tabs in the slots and pressing down to secure the latch. How to illuminating the Candle Move the OFF-ON switch on the bottom to ON. The candle will illuminate until you manually move the switch to OFF. ON-OFF button:Illuminating the Candle On=Off(Note:Before you use the Remote Control, switch the ON-OFF button to ON at the buttom of the LED candles) TIMER:set On/Off Automatic Time feature, set to 2Hours/4Hours/6Hours/8Hours *For example, s et 2H at 19:00, it will automatically shutdown at 21:00. Will be automatically open at 19:00 next day, at 21:00 then automatically shut down. It will cycle every 24 hours. Mode:Candle-Non-Moving Flame;Light-Moving Flame Brightness Control: Left button to lower the brightness Right button to increase brightness. More tips: Pull out the palstic sheet before use. If the flame doesn't move after yor press "light" button, press + to increase brightness to maximum. If the battery of the Remote Control runs out, you may pull out the battery tray then replace a new button cell battery.
||400 x 410 x 790