Package include: 1 x Diamond Painting ( without framework ) DIY Diamond Painting Production Steps: 1. Open the box and check the diamond draw special tools. 2. View the resin diamond color, arranged in order of coding. 3. Uncover tape drawing above, you will see a lot of symbols corresponding to the color coding. 4. According to the corresponding color coded clamp the corresponding the resin inlaid diamonds. 5. Suggested that one type of the resin diamond one set completed faster. 6. In order to create a perfect diamond painting, drawings put together in one place every row symbols do not have to stay stuck diamonds. 7. To cut a good figure on the drawings hold sorted array mounted to the plane of the material above. 8. Splices need flat against the neat, do not have cracks. 9. after a good fight, the rest of the gap at the glue corresponding symbols of diamonds. 10. To complete a good diamond drawing, put it in your selection of a suitable framework ( a framework is not provided). DIY Diamond painting Precautions: 1. Reference before the operation steps. 2. If you do not know what color to use, please refer to the color table. 3. Assembled the resin diamond pattern must take point inside the cut line, and then trim pieces, to ensure the overall effect. Notice: 1.Please allow 1-3cm error due to manual measurement. 2. Due to the screen and lighting difference, the actural may be a bit of different with the picture shows. Please kindly understand.